Name: Arduino Nano RP2040 Connect - Med headere
Brand: Arduino
SKU: ABX00053
Price: 31.75 GBP
Availability: InStock

Nano RP2040 Connect passer til Arduino Nano-formfaktoren, hvilket gør det til et lille board med STORE funktioner. Hjernen i boardet er Raspberry Pi RP2040 silicium; en dual-core Arm Cortex M0+, der kører på 133 MHz. Den har 264 KB SRAM, og de 16 MB flashhukommelse er off-chip for at give dig ekstra lagerplads.

Men det, der virkelig er spændende, er de indbyggede tilslutningsmuligheder. Det enormt populære og yderst tilpasningsdygtige u-blox NINA-W102 radiomodul er installeret for at gøre dette til en sand IoT-mester. Det betyder også, at du kan udnytte skyens kraft med fuld Arduino Cloud-kompatibilitet.

Den har indbyggede sensorer, der også kan forvandle dine byggeprojekter til kraftfulde projekter. Mikrofon og bevægelsessensor tilføjer en dybde af muligheder, der er næsten umulige at finde i et board af denne størrelse.

Arduino Nano RP2040 Connect er det bedste valg til RP2040-enheder og den perfekte løsning til at opgradere dine projekter og frigøre potentialet i nye.

Bliv forbundet

u-blox NINA-W102 radiomodulet gør dette til den eneste tilsluttede RP2040-mulighed. Det giver dig fuld WiFi 802.11b/g/n-forbindelse, sammen med Bluetooth® og BLE v4.2

Sensoroverbelastning

Pakket på dette lille board er et par meget nyttige sensorer. En indbygget mikrofon er der til lydaktivering, lydkontrol og endda AI-stemmegenkendelse. Den seks-aksede smarte IMU med AI-funktioner fortæller boardet, hvilken vej det bevæger sig, og tilføjer faldregistrering og dobbelttrykaktivering.

Hårdtarbejdende hardware

Det er måske et lille board, men Nano RP2040 Connect har en hardwaremæssig kraft. Det matcher den etablerede Arduino Nano-formfaktor, hvilket gør det til den perfekte opgradering til projekter i alle størrelser.

Mere hukommelse

Med 16 MB flashhukommelse, der er ekstern i forhold til mikroprocessoren, er der masser af plads til dine kode- og lagringsbehov.

Strømstik

De programmerbare I/O-pins har funktioner, som større printkort kun drømmer om; 22 digitale, 20 med PWM og 8 analoge.

Raspberry Pi-kompatibel

Smarte softwaremuligheder til en meget smart enhed. Den har fuld understøttelse af hele RP2040-softwareøkosystemet.

Arduino-elsker

Understøtter programmeringssproget Arduino, IDE 2.0 og alle de fantastiske biblioteker.

Python-kraft

Fuld understøttelse af MicroPython. Få en Nano RP2040 Connect, og den leveres med en GRATIS OpenMV-licens til maskinsyn.

Arduino Cloud-klar

Programmér og betjen Nano RP2040 Connect direkte fra din browser. Fuldt kompatibel fra dag ét. Upload dine skitser eksternt via luften med øjeblikkelig fjernbetjening fra den gratis Arduino IoT Remote smartphone-app. Arduino Nano RP connect er også tilgængelig uden monterede headere.

Raspberry Pi RP2040 mikrocontroller
- 133 MHz 32-bit dobbeltkerne Arm® Cortex®-M0+
- 264 kB indbygget SRAM
- DMA-controller (Direct Memory Access)
- Understøttelse af op til 16 MB off-chip flash-hukommelse via dedikeret QSPI-bus
- USB 1.1-controller og PHY, med vært- og enhedsunderstøttelse
- 8 PIO-tilstandsmaskiner
- Programmerbar IO (PIO) til udvidet understøttelse af periferiudstyr
- 4-kanals ADC med intern temperatursensor, 0,5 MSa/s, 12-bit konvertering
- SWD-fejlfinding
- 2 on-chip PLL'er til at generere USB og kernens ur
- 40nm procesnode
- Understøttelse af flere lavstrømstilstande
- USB 1.1-vært/enhed
- Intern spændingsregulator til at forsyne kernespændingen
- Avanceret højtydende bus (AHB)/avanceret periferibus (APB)
- Arduino® Nano RP2040 Connect
- 2 / 19 Arduino® Nano RP2040 Connect / Rev. 01 - 14/05/2021
U-blox® Nina W102 WiFi/Bluetooth-modul
- 240MHz 32-bit dobbeltkernet Xtensa LX6
- 520kB indbygget SRAM
- 448 Kbyte ROM til opstart og kernefunktioner
- 16 Mbit FLASH til kodelagring inklusive hardwarekryptering for at beskytte programmer og data
- 1 kbit EFUSE (ikke-sletbar hukommelse) til MAC-adresser, modulkonfiguration, FlashEncryption og Chip-ID
- IEEE 802.11b/g/n single-band 2,4 GHz WiFi-drift
- Bluetooth 4.2
- Integreret plan inverteret F-antenne (PIFA)
- 4x 12-bit ADC
- 3x I2C, SDIO, CAN, QSPI
Hukommelse
- AT25SF128A 16MB NOR-flash
- QSPI-dataoverførselshastighed på op til 532 Mbps
- 100.000 program-/slettecyklusser
ST LSM6DSOXTR 6-akset IMU
- 3D-gyroskop (±2/±4/±8/±16 g fuld skala)
- 3D-accelerometer (±125/±250/±500/±1000/±2000 dps fuld skala)
- Avanceret skridttæller, skridtmåler og skridttæller
- Signifikant bevægelsesdetektion, vippedetektion
- Standardafbrydelser: frit fald, opvågning, 6D/4D-orientering, klik og dobbeltklik
- Programmerbar finite state machine: accelerometer, gyroskop og eksterne sensorer
- Maskinlæringskerne
- Indbygget temperatursensor
ST MP34DT06JTR MEMS-mikrofon
- AOP = 122,5 dBSPL
- 64 dB signal-støjforholdli
- Omnidirektionel følsomhed
- -26 dBFS ± 1 dB følsomhed
RGB LED
- Fælles anode
- Forbundet til U-blox® Nina W102 GPIO
Microchip® ATECC608A Krypto
- Kryptografisk co-processor med sikker hardwarebaseret nøglelagring
- I2C, SWI
- Hardwareunderstøttelse af symmetriske algoritmer:
  - SHA-256 & HMAC Hash inklusive off-chip kontekst lagring/gendannelse
  - AES-128: Krypter/dekrypter, Galois-feltmultiplikation til GCM
- Intern NIST SP 800-90A/B/C tilfældig talgenerator (RNG) af høj kvalitet
- Sikker opstartsunderstøttelse:
  - Fuld ECDSA-kodesignaturvalidering, valgfri gemt digest/signatur
  - Valgfri deaktivering af kommunikationsnøgle før sikker opstart
  - Kryptering/godkendelse af meddelelser for at forhindre angreb ombord
I/O
- 14x digital pinkode
- 8x analog pin
- Mikro-USB
- UART-, SPI- og I2C-understøttelse
Magt
- Buck step-down konverter
Sikkerhedsoplysninger
- Klasse A

Arduino Nano RP2040 Connect Datasheet (ABX00053-datasheet.pdf, 765 Kb) [download]

Arduino Nano RP2040 Connect Schematics (ABX00053-schematics.pdf, 584 Kb) [download]

Arduino Nano RP2040 Connect Pinout (Pinout_NanoRP2040_latest.pdf, 503 Kb) [download]

Do you sell gift vouchers?

Is model rocketry legal in the UK?

My rocket won't launch what could be wrong?

Ignition problems can be frustrating but they usually turn out to be one of just a few things! It's always worth having some spare igniters, you can buy some on our Starters & Igniters page.

1) Your batteries may not have enough power, or not be able to supply enough power. We ship and sell Duracell Procell Intense batteries as these are designed to supply lots of current when needed. You can find these in the Batteries & Chargers page.

2) Check your batteries are secure, it's possible your battery springs may have been compressed if the batteries rattle preventing a good connection. Take out the batteries and stretch out the springs before re-installing.

3) You may have a short circuit on the igniter. Check that your launch controller clips or igniter wires are not touching each other. The Estes igniters can sometimes get the wires squeezed together when you install them in the engine with the plug. Ensure the plug is put in with the wires apart. It's also worth noting that if the clips are touching the blast plate then this will also short out your circuit.

4) Check for lots of residue on the clips. This could prevent a good connection to your igniter. If this is the case clean them with some fine sandpaper or steel wool.

5) If your igniter has burnt when you remove it then you may not have pushed the igniter all the way in to the motor. Make sure igniters are all the way into your motor and with higher power motors follow the instructions carefully.

6) You may have failed to put the safety key into the launch controller correctly, or forgotten to do so. It's rare but it can happen during the business of launch time.

7) You could have been very unlucky with a motor or igniter. Try another motor and igniter to see if your launch controller is OK and this was the case.

8) You could have a faulty launch controller. A multi meter could be connected to the clips to measure the current flowing. It should show a good few whole amps when the launch button is pressed. Any lower would suggest bad batteries, or none at all a bad controller. If in doubt please contact us for assistance if you've got this far on the checklist!

You may wish to buy a upgraded launch controller too if you want to be extra sure of great launches! The Klima launch controller can take two 9v batteries which gives it plenty of juice! If you want to stand a bit further back the Estes Pro launch controller or E launch controller have longer leads. Check out our Launch controllers page for more information.

What age is suitable for model rocketry?

How soon will I receive my order?

What do I need to build and launch a model rocket?

How should I store my rocket motors?

Can I come and visit you?

How can I get into rocketry? Can anyone do it?

How much space do I need to launch my rockets?

My rocket has had an accident, how can I get spare parts?

What accessories can I add to my rocket?

Ingen anmeldelser fundet

Shipping your order.

Once you have paid for your order we will work to dispatch your items.
All items on our website shown as in stock, are in our warehouse ready to ship unless stated otherwise on the product page.

We aim to ship orders within 1 working day of ordering on your chosen shipping method.
We do not guarantee this however, especially at extremely busy times of the year. Therefore if you do require your order urgently, please drop us a email after you order to let us know.

Please note that you must use a courier option if your order contains rocket motors, you can not use the Royal Mail for orders with motors. The website should automatically disable the Royal Mail shipping option once these items are added to your cart. However in the case of a website mistake you will need to use the courier option.

Orders will ship on your chosen courier, all UK Mainland couriers we offer are a next day service. The couriers however do not offer us a guarantee on this, so we are unable to pass one along.
Over 95% of our orders do arrive next day as intended.

If you require Saturday delivery there is a Saturday delivery option on the checkout page. DHL do not offer Saturday delivery by default.

Delivery options.

We offer a variety of delivery options on the checkout page. We also off the option to pickup your order from our warehouse in Millom, Cumbria, LA18 4JS.
You can use the Royal Mail option for smaller items up to 2Kg in weight as long as they do not contain motors.
Please be aware if you require AM or Saturday delivery these orders may still take up to 1 working day to dispatch. We do, however, prioritise express orders for dispatch.

Returns.

Returns for any reason

We will accept returns on all products for 90 days from the date of delivery.
If an item was sent un-tracked the delivery date is agreed to be 2 (two) days after shipment.

Changed your mind or do not like the product?

You are required to cover the cost of returning the item to us, we can send you a pre-paid label to deduct from your refund if it is convenient or cost effective for you.

Items without rocket motors

£7

Items with rocket motors

£13

These prices cover up to 25Kg in weight, and if the order is larger multiple labels will be required. These prices are for UK collections only, please contact us if outside of the UK.

Returned items should be undamaged and in a good condition suitable to be sold again. They need to arrive with us in this condition.

You must package the item well so that damage does not occur in transit, although you do not need to use the original packaging.

Item was damaged, faulty or other reasons?

We are happy to cover the cost of returning a product that has arrived damaged or faulty within 90 days.
We will offer to replace the faulty or damaged item, or refund you in full at your preference.
In regards to missing parts of kits we reserve the right to replace the required parts rather than the entire kit.

Was your item customised, personalised or ordered in specially?

Custom items & special order items can not be returned for a refund as they are not sellable or may be hard to sell again.
If the item arrives damaged or faulty we will of course still offer a refund or replacement on custom orders.

My item has not arrived can I have a refund?

If your item has not been dispatched, yet then we can cancel your order and refund you in full. Except if this is a special order item that we are unable to cancel and have already ordered from the supplier.

If your item has been dispatched then we will need to investigate with our couriers before continuing with our refund process. This may take up to 14 working days to complete although is usually a far quicker process. We will always offer a full refund or replacement for lost items.

Your refund

Refunds will be processed within 3 working days of your item being returned to us.

If you paid by BACS we will require your bank details to send a repayment via BACS.
BACS payments should usually arrive in your account the same day, however please allow up to 5 working days.

If you paid by PayPal (Debit or Credit Card) the refund will usually be processed on to the payment method used to make the payment. This may take up to 7 working days to complete but is usually within 3-5 working days.

If you paid via credit or debit card the refund will usually be with you within 1-5 working days.

If you paid by cheque we are unable to process a refund by any method other than cheque and this will be posted 2 working days after your payment cleared at the earliest. (This is the final clearing date defined by the latest time period in which the cheque can be reversed, not the initial funds release date.)

Total Impulse (equivalent Impulse Class)	Minimum site dimensions (Metric)	Minimum site dimensions (Imperial)
Up to 2.5 Ns (A)	30 metres	98 feet / 33 yards
2.5 - 5 Ns (B)	60 metres	197 feet / 66 yards
5 - 10 Ns (C)	120 metres	394 feet / 130 yards
10 - 20 Ns (D)	150 metres	492 feet / 164 yards
20 - 40 Ns (E)	300 metres	984 feet / 328 yards
40 - 80 Ns (F)	300 metres	984 feet / 328 yards
80 - 160 Ns (G)	300 metres	984 feet / 328 yards
160 - 320 Ns (H)	450 metres	1476 feet / 492 yards
320 - 640 Ns (I)	450 metres	1476 feet / 492 yards
640 - 1,280 Ns (J)	450 metres	1476 feet / 492 yards
1,280 - 2,560 Ns (K)	450 metres	1476 feet / 492 yards
2,560 - 5,120 Ns (L)	450 metres	1476 feet / 492 yards
5,120 - 10,240 (M)	450 metres	1476 feet / 492 yards
10,240 - 20,480 Ns (N)	600 metres	1968 feet / 656 yards
20,480 - 40,960 (O)	900 metres	2952 feet / 984 yards