Menú

BSI Finish-cure 20 minute epoxy 4 1/2oz (127ml) glue [CLONE]

BSI201
74.71 PLN 62.25 PLN
Disponibilidad: 4 Artículos
120 días
Precio en puntos: 1249 puntos
Puntos de recompensa: 62 puntos
 
Haga su pedido antes de las 10 a. m. para recibirlo al día siguiente.
Envío regular desde £4.99 - £8.49
Gana un 5%* en puntos de recompensa en tu pedido
Descubra más en nuestra página de recompensas
Ganado en nuestro almacén
Todo el stock está listo para envío inmediato.
Período de devolución de 120 días
Tranquilidad de espíritu con una ventana de retorno amplia
  • Ver todas las variaciones como lista

FINISH-CURE™ 20 min. epoxy is an excellent, low odor substitute for polyester resins. It can be used for applying fiberglass cloth to wood or by itself to give wood a surface ready for primer and paint. FINISH-CURE™ can be sanded the easiest of all our epoxies and is excellent for the sheeting of foam core wings. Allow 8 hours for full curing. For best results, FINISH-CURE™ should be heated to a temperature above 85 degrees F or applying light weight fiberglass, lay cloth on balsa first, then brush on FINISH-CURE™. When fully saturated, go over the surface with a heat gun, and then squeegee off excess epoxy with a playing card from an old deck. Heat and remove excess several times for a light weight finish. If room temperature is below 70 degrees F use a heat gun on the surface several times for the next 2 hours. When dry, lightly sand, then fill surface with a low weight spakeling compound, scrapping off excess with a playing card. Sand to a smooth finish ready for primer. For heavy weight fiberglass, apply the epoxy before and after laying down the cloth. FINISH-CURE™ is best mixed in a disposable cup. Great for all materials including wood, plywood, metal, plastic and more.