Menù

BSI Finish-cure 20 minute epoxy 4 1/2oz (127ml) glue [CLONE]

BSI201
$31.22 $26.01
Disponibilità: 4 Articolo(i)
120 giorni
Prezzo in punti: 1249 punti
Punti fedeltà: 62 punti
 
Ordina prima delle 10:00 per la consegna il giorno successivo
Spedizione regolare da £ 4,99 a £ 8,49
Guadagna il 5%* in punti premio sul tuo ordine
Scopri di più sulla nostra pagina dei premi
Animali vivi nel nostro magazzino
Tutto lo stock è pronto per la spedizione immediata
Periodo di reso di 120 giorni
Tranquillità con una lunga finestra di ritorno
  • Visualizza tutte le varianti come elenco

FINISH-CURE™ 20 min. epoxy is an excellent, low odor substitute for polyester resins. It can be used for applying fiberglass cloth to wood or by itself to give wood a surface ready for primer and paint. FINISH-CURE™ can be sanded the easiest of all our epoxies and is excellent for the sheeting of foam core wings. Allow 8 hours for full curing. For best results, FINISH-CURE™ should be heated to a temperature above 85 degrees F or applying light weight fiberglass, lay cloth on balsa first, then brush on FINISH-CURE™. When fully saturated, go over the surface with a heat gun, and then squeegee off excess epoxy with a playing card from an old deck. Heat and remove excess several times for a light weight finish. If room temperature is below 70 degrees F use a heat gun on the surface several times for the next 2 hours. When dry, lightly sand, then fill surface with a low weight spakeling compound, scrapping off excess with a playing card. Sand to a smooth finish ready for primer. For heavy weight fiberglass, apply the epoxy before and after laying down the cloth. FINISH-CURE™ is best mixed in a disposable cup. Great for all materials including wood, plywood, metal, plastic and more.